Eaton PowerXL DM1 Series Applications Manual page 93

Table 34. Ethernet communication (Cont.).
Static IP address
P12.1.6 a
Minimum value: N.A.
Description: Defines the static IP address.
Static subnet mask
P12.1.7 a
Minimum value: N.A.
Description: Defines the static subnet mask.
Static default gateway
P12.1.8 a
Minimum value: N.A.
Description: Defines the static default gateway.
P12.1.9
Ethernet communication timeout
Minimum value: 0 ms
Description: Selects the time it waits before a communication fault occurs over ethernet.
P12.2 - Trusted IP filter (DM1 PRO only).
P12.2.1
Trusted IP white list
Minimum value: N.A.
Description: Defines the IP addresses in the white list. A setting of 192.168.1.255 enables all connections on the local subnet.
P12.2.2
Trusted IP filter enable
N.A.
Minimum value:
Options: 0 = Disabled; or
1 = Enabled.
Description: Enables IP white listing. Devices not in the white list will not be able to establish communications with the drive.
P12.3 - Modbus TCP (DM1 PRO only).
Modbus TCP enable
P12.3.1 a
N.A.
Minimum value:
Options: 0 = Disable; or
1 = Enable.
Description: Enables modbus TCP communications, must be enabled to connect to Power Xpert inControl.
P12.3.2 Modbus TCP connection limit
Minimum value: N.A.
Description: Maximum number of connections allowed to the drive.
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com
Maximum value: N.A.
Maximum value: N.A.
Maximum value: N.A.
Maximum value: 60,000 ms
Maximum value: N.A.
N.A.
Maximum value:
N.A.
Maximum value:
Maximum value: N.A.
Chapter 5 - Fan control application
ID 1501
Default value: 192.168.1.254
ID 1503
Default value: 255.255.255.0
ID 1505
Default value: 192.168.1.1
ID 611
Default value: 10,000 ms
ID 68
Default value: 192.168.1.255
ID 76
1
Default value:
ID 1942
0
Default value:
ID 609
Default value: 5
83