Eaton PowerXL DM1 Series Applications Manual page 240
Hide thumbs
Also See for PowerXL DM1 Series:
- Installation manual (102 pages) ,
- Quick start manual (68 pages) ,
- Instruction leaflet (31 pages)
Table of Contents
Advertisement
Chapter 7- Multi-purpose application
Table 70. Ethernet communication (*DM1 Pro) (Cont.).
P12.2.2
Trusted IP filter enable
Minimum value:
N.A.
Options:
0 = Disabled; or
1 = Enabled.
Description:
Enables IP white listing. Devices not in the white list will not be able to establish communications with the drive.
P12.3 - Modbus TCP (DM1 PRO only).
Modbus TCP enable
a
P12.3.1
Minimum value:
N.A.
Options:
0 = Disable; or
1 = Enable.
Enables modbus TCP communications, must be enabled to connect to Power Xpert inControl.
Description:
P12.3.2
Modbus TCP connection limit
Minimum value:
N.A.
Maximum number of connections allowed to the drive.
Description:
P12.3.3
Modbus TCP unit identifier number
Minimum value:
N.A.
Unit identifier unit value for modbus TCP.
Description:
P12.3.4
Modbus TCP protocol status
Minimum value:
N.A.
Options:
0 = Stopped;
1 = Operational; or
2 = Faulted.
Description:
This parameter shows the protocol status for modbus TCP communication.
P12.3.5
Modbus TCP fault response
N.A.
Minimum value:
Options:
0 = Only in fieldbus control mode - when fieldbus is the control place and fieldbus fault is active, the drive will fault on loss of
communications. If not in fieldbus control, place will not fault.
1 = In all control modes - no matter the control place setting, if communication is lost, fieldbus fault response will occur.
Description:
Defines the fieldbus fault condition for modbus TCP communication.
P12.4 - Ethernet IP (DM1 PRO only).
Ethernet based protocol select
P12.4.1
a
N.A.
Minimum value:
Options:
0 = Disabled; or
2 = BACnet IP.
Description:
Selects the active communication protocol on the ethernet I/P port.
P12.4.2
Ethernet IP protocol status
Minimum value:
N.A.
Options:
0 = Off;
1 = Operational; or
2 = Faulted.
Description:
Indicates if ethernet protocol is active or not.
230
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com
Maximum value:
N.A.
Maximum value:
N.A.
Maximum value:
N.A.
Maximum value:
N.A.
Maximum value:
N.A.
N.A.
Maximum value:
N.A.
Maximum value:
Maximum value:
N.A.
ID 76
Default value:
1
ID 1942
Default value:
0
ID 609
Default value:
5
ID 610
Default value:
1
ID 612
Default value:
N.A.
ID 2517
0
Default value:
ID 1997
0
Default value:
ID 608
Default value:
N.A.
Advertisement
Table of Contents
