Eaton PowerXL DM1 Series Applications Manual page 182

Chapter 7- Multi-purpose application
Table 58. Inputs (Cont.).
AI sleep limit
P2.4.8 b
Minimum value: 0.00%
Descriptions: Defines the sleep level of the analog input - if the analog input signal is below this level for a time greater than the analog sleep delay,
the drive will transition to a sleep state and restart when the analog input increases above this level.
AI sleep delay
P2.4.9 b
0.00 s
Minimum value:
Descriptions: Defines the delay for the analog input sleep level.
AI joystick offset
P2.4.10 b
Minimum value: -50.00%
Joysticks zero point by default is the middle of AI range. Joystick offset defines how much the zero point is moved in the forward or
Descriptions:
reverse from this analog input center point.
P2.5 - Drive reference pot.
Pot custom minimum
P2.5.1 b
0.00%
Minimum value:
Description: Defines the minimum percentage for the input range to be associated with AI reference minimum scale.
Pot custom maximim
P2.5.2 b
Minimum value: 0.00%
Defines the maximum percentage for the input range to be associated with AI reference maximum scale.
Description:
Pot filter time
P2.5.3 b
Minimum value: 0.00 s
Description: Defines the filter time applied to the analog input signal - zero equals no filtering.
Parameter value can only be changed after the drive has stopped.
a
Parameter value will be set to be default when changing macros.
b
172
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com
Frequency Reference
Hz
REVERSE
50%
Reference Scaling Max
A
AI Reference Scale
Maximum Value = 70Hz
Maximum Frequency = 50Hz
Minimum Frequency =
Maximum value:
Reference Scaling Minimum
AI Reference Scale
Minimum Value = 0Hz
AI Custom
Minimum = 20%
Frequency Reference
Hz
REVERSE
50%
Reference Scaling Max
A
AI Reference Scale
Maximum Value = 70Hz
Maximum Frequency = 50Hz
START STOP
Minimum Frequency =
Reference Scaling Minimum
AI Reference Scale
Minimum Value = 0Hz
AI Custom
Minimum = 20%
AI Joystick
Hysteresis = 20%
Maximum value:
Maximum value:
Maximum value:
Maximum value:
Maximum value:
FORWARD
50%
B
Analog Input(V/mA)
100.00% Default value:
(0– 10V/20mA)
AI Custom
Maximum = 90%
AI Joystick
Hysteresis = 20%
FORWARD
50%
B
STOP START
Analog Input(V/mA)
(0– 10V/20mA)
AI Custom
Maximum = 90%
AI Sleep Limit = 7%
320.00 s
Default value:
50.00% Default value:
100.00%
Default value:
100.00% Default value:
10.00 s Default value:
ID 179
0.00%
ID 180
0.00 s
ID 133
0.00%
ID 1814
20.00%
ID 1815
100.00%
ID 1816
1.00 s