Eaton PowerXL DM1 Series Applications Manual page 166
Hide thumbs
Also See for PowerXL DM1 Series:
- Installation manual (102 pages) ,
- Quick start manual (68 pages) ,
- Instruction leaflet (31 pages)
Table of Contents
Advertisement
Chapter 7- Multi-purpose application
Table 56. Multi-pump measurement (*DM1 Pro) (Cont.).
M8.7.4
Drive 4
Minimum value:
rpm
Description:
Provides the motor speed (rpm) of drive 4 while using the multi-pump mode.
M8.7.5
Drive 5
Minimum value:
rpm
Description:
Provides the motor speed (rpm) of drive 5 while using the multi-pump mode.
M8.8 - Run time (*DM1 Pro).
M8.8.1
Drive 1
Hours
Minimum value:
Description:
Provides the motor run time (h) of drive 1 while using the multi-pump mode.
M8.8.2
Drive 2
Hours
Minimum value:
Description:
Provides the motor run time (h) of drive 2 while using the multi-pump mode.
M8.8.3
Drive 3
Minimum value:
Hours
Description:
Provides the motor run time (h) of drive 3 while using the multi-pump mode.
M8.8.4
Drive 4
Minimum value:
Hours
Provides the motor run time (h) of drive 4 while using the multi-pump mode.
Description:
M8.8.5
Drive 5
Minimum value:
Hours
Provides the motor run time (h) of drive 5 while using the multi-pump mode.
Description:
M9 - Multi-monitoring (for remote keypad only).
M9.1
Multi-monitoring
Minimum value:
N.A.
Description:
Displays any three monitoring values in a single screen. The values are selectable via the keypad menu. Multi-monitor page could
see three lines of monitoring values. Up and down keys can be used to select the row and then hitting the left arrow key will allow for
editing the value then by going up and down.
Table 57. Parameters (Cont.).
.
P1 - Basic
parameters.
Minimum frequency
P1.1
b
Minimum value:
0.00 Hz
Description:
Defines the lowest frequency at which the drive will operate. This setting will limit other frequency parameter settings.
1 = Fire mode minimum frequency.
2 = Derag.
3 = MPFC staging frequency.
4 = MPFC master fixed frequency.
5 = Prime pump frequency.
6 = Prime pump frequency 2.
156
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com
Maximum value:
rpm
Maximum value:
rpm
Hours
Maximum value:
Hours
Maximum value:
Maximum value:
Hours
Maximum value:
Hours
Maximum value:
Hours
Maximum value:
N.A.
Maximum value:
400.00 Hz
ID 2263
Default value:
rpm
ID 2275
Default value:
rpm
ID 2228
Hours
Default value:
ID 2240
Hours
Default value:
ID 2252
Default value:
Hours
ID 2264
Default value:
Hours
ID 2276
Default value:
Hours
ID 30
Default value:
0, 1, 2.
ID 101
Default value:
0.00 Hz
Advertisement
Table of Contents
