Eaton PowerXL DM1 Series Applications Manual page 202

Chapter 7- Multi-purpose application
Table 61. Motor control (Cont.).
Motoring torque limit REV
P5.2.10 b
0.0%
Minimum value:
Description: Motoring torque limit in the reverse direction.
Generator torque limit REV
P5.2.11 b
0.0%
Minimum value:
Description: Generation torque limit in the reverse direction.
Motoring power limit
P5.2.12 b
0.0%
Minimum value:
Description: Motor power limit setting.
Generator power limit
P5.2.13 b
0.0%
Minimum value:
Description: Generator power limit setting.
Flux reference
P5.2.14 ab
0.0%
Minimum value:
Description: This parameter defines the amount of flux that is output to the motor, which is valid only in open loop vector control.
PM initial selection
P5.2.15 a
N.S.
Minimum value:
Options: 0 = Align;
1 = Six pluse; or
2 = HFI.
PM initial angle detect method.
Description:
PM initial time
P5.2.16 a
0.0 s
Minimum value:
PM initial angle detect time.
Description:
PM excited current
P5.2.17 a
0%
Minimum value:
PM excited current during the low speed.
Description:
PM excited current off frequency
a
P5.2.18
10.00%
Minimum value:
PM excited current cut off frequency.
Description:
P5.2.19
Observer Kp
1%
Minimum value:
Description: Linear gain of the PM/IM observer.
Parameter value can only be changed after the drive has stopped.
a
Parameter value will be set to be default when changing macros.
b
Table 62. Protections (Cont.). .
P6.1 - Motor.
Output phase fault
P6.1.1 ab
N.A.
Minimum value:
Options: 0 = No response;
1 = Warning;
2 = Fault - stop mode after fault according to parameter stop mode; or
3 = Fault - stop mode after fault always by coasting.
Output phase supervision of the motor ensures that the motor phases have equal currents. If phases are 5% difference from one
Description:
another, the frequency converter will respond corresponding to this setting.
192
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com
Maximum value: 300.0%
300.0%
Maximum value:
300.0%
Maximum value:
300.0%
Maximum value:
500.0%
Maximum value:
N.A.
Maximum value:
Maximum value: 60.0 s
Maximum value: 200%
Maximum value: MotorNomFreq %
Maximum value: 3,000%
N.A.
Maximum value:
ID 1838
Default value: 300.0%
ID 1839
300.0%
Default value:
ID 1607
300.0%
Default value:
ID 1608
300.0%
Default value:
ID 1620
100.0%
Default value:
ID 1890
1
Default value:
ID 1891
Default value: 0.7 s
ID 1892
Default value: 20%
ID 1893
Default value: 20.00%
ID 2901
Default value: 100%
ID 308
2
Default value: