Eaton PowerXL DM1 Series Applications Manual page 23

Table 5. Start-up wizard instructions (Cont.).
Motor nominal current
P1.6 a
Minimum value: DriveNomCurrCT*1/10 A
Description: Motor nominal nameplate full load current. Find this value on the rating plate of the motor.
Motor nominal speed
P1.7 a
Minimum value: 300 rpm
Description: Motor nominal nameplate base speed. Find this value on the rating plate of the motor.
Motor power factor
P1.8 a
Minimum value: 0.30
Description: Motor nominal nameplate full load power factor. Find this value on the rating plate of the motor.
Motor nominal voltage
P1.9 a
Minimum value: 180 V
Description: Motor nominal nameplate base voltage. Find this value on the rating plate of the motor.
Motor nominal frequency
P1.10 a
Minimum value: 8.00 Hz
Description: Motor nominal nameplate rated frequency. Find this value on the rating plate of the motor. This parameter sets the field weakening
point (P5.1.5) to the same value.
Acceleration time 1
b
P1.3
Minimum value: 0.1 s
Description: The time required for the output frequency to accelerate from zero frequency to maximum frequency (P1.2). When accelerating from
different frequency levels, the acceleration time will be a fraction of the total ramp time.
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com
Maximum value: DriveNomCurrCT*2 A
Maximum value: 20,000 rpm
Maximum value: 1.00
Maximum value: 690 V
Maximum value: 400.00 Hz
Maximum value: 3000.0 s
Default value:
Motor Nom. Motor Nom.
Voltage Current
230/400V 4.0/2.3A
0.75 kW cos 0.67
1410 min –1 50 Hz
Motor PF
Motor Nom. Motor Nom.
Speed Frequency
Default value:
Default value:
Default value:
Default value:
Default value:
Chapter 3 - Startup
ID 486
DriveNomCurrCT
ID 489
MotorNomSpeedMFG
ID 490
0.85
ID 487
MotorNomVoltMFG
ID 488
MotorNomFreqMFG
ID 103
20 .0 s
13