Eaton PowerXL DM1 Series Applications Manual page 247

Hide thumbs Also See for PowerXL DM1 Series:
Table of Contents

Advertisement

Table 71. System (Cont.).
P13.4 - Version information.
P13.4.1
Keypad software version (for remote Keypad only)
Minimum value:
N.A.
Keypad firmware version.
Description:
P13.4.2
Motor control software version
Minimum value:
N.A.
DSP/motor control software version.
Description:
P13.4.3
Application software version
Minimum value:
N.A.
MCU/application software version.
Description:
P13.4.4
Software bundle version
Minimum value:
N.A.
Description:
Software bundle version.
P13.5 - Application information.
P13.5.1
Serial number
Minimum value:
N.A.
Description:
Product serial number.
P13.5.2
Multi-monitor set (for remote keypad only)
N.A.
Minimum value:
Options:
0 = Change enable; or
1 = Change disable.
Description:
The keypad display can display three actual monitored values at the same time. This parameter determines if the operator is allowed to
replace the values monitored with other values.
P13.5.3
Keypad lock PIN
Minimum value:
0
Description:
The keypad can be protected against unauthorized changes with the keypad lock function after keys are not pressed five minutes.
When the password function is enabled, the user will be prompted to enter a password before the keypad display parameter or
response to key press except up/down/left/right.
By default, the password function is not in use. If you want to activate the password, change the value of this parameter to any number
between 1 and 9,999.
To deactivate the password, reset the parameter value to 0.
P13.5.4
Drive application name
Minimum value:
N.A.
P13.6 - User information.
P13.6.1
Total MWh count
Minimum value:
N.A. MWh
Description:
Megawatt hours total operation time counter of the drive output active.
P13.6.2
Total power day count
Minimum value:
N.A.
Description:
Number of days the drive has been supplied with power.
P13.6.3
Total power hour count
Minimum value:
N.A.
Description:
Number of hours the drive has been supplied with power.
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES
Maximum value:
N.A.
Maximum value:
N.A.
Maximum value:
N.A.
Maximum value:
N.A.
Maximum value:
N.A.
N.A.
Maximum value:
Maximum value:
9,999
Maximum value:
N.A.
Maximum value:
N.A. MWh
Maximum value:
N.A.
Maximum value:
N.A.
Chapter 7- Multi-purpose application
Default value:
Default value:
Default value:
Default value:
Default value:
Default value:
Default value:
Default value:
Default value:
Default value:
Default value:
MN040049EN—September 2021 www.eaton.com
ID 640
N.A.
ID 642
N.A.
ID 644
N.A.
ID 1714
N.A.
ID 648
N.A.
ID 627
0
ID 75
0
ID 2922
N.A.
ID 601
N.A.
MWh
ID 603
N.A.
ID 606
N.A.
237

Advertisement

Table of Contents
loading

Table of Contents