Eaton PowerXL DM1 Series Applications Manual page 243

Table 71. System (Cont.). .
P13.1 - Basic settings.
P13.1.1
Language
Minimum value: N.A.
0 = English;
Options:
1 = English; or
2 = English.
Description: This parameter offers the ability to control the frequency converter through the keypad in the language of your choice. Currently
available language is English only.
Application
P13.1.2 a
N.A.
Minimum value:
Options: 0 = Standard;;
1 = Pump;
2 = Fan; or
3 = Multi-purpose.
This parameter sets the active application if multiple applications have been loaded.
Description:
Parameter sets
P13.1.3 a
Minimum value: N.A.
Options: 0 = No;
1 = Load factory default parameters;
2 = Reload set 1;
3 = Reload set 2;
4 = Store parameter set 1;
5 = Store parameter set 2;
6 = Reset; or
7 = Reload defaults VM.
Description: This parameter allows you to reload the factory default parameter values, and to store and load two customized parameter sets.
P13.1.4
Up to keypad (for remote keypad only)
Minimum value: N.A.
Options: 0 = No; or
1 = Yes (all parameters).
Description: This function uploads all existing parameter groups to the keypad.
Down from keypad (for remote keypad only)
P13.1.5 a
Minimum value: N.A.
0 = No;
Options:
1 = All parameters;
2 = All, no motor; or
3 = Application parameters.
Description: This function downloads one or all parameter groups from the keypad to the drive.
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES
Maximum value: N.A.
N.A.
Maximum value:
Maximum value: N.A.
Maximum value: N.A.
Maximum value: N.A.
Chapter 7- Multi-purpose application
Default value:
Default value:
Default value:
Default value:
Default value:
MN040049EN—September 2021 www.eaton.com
ID 340
0
ID 142
N.A.
ID 619
N.A.
ID 620
N.A.
ID 621
N.A.
233