Eaton PowerXL DM1 Series Applications Manual page 225

Table 68. Fieldbus (FB) status (Cont.).
FB process data input 4 selection
P10.1.4 b
Minimum value: 0
Description: With the fieldbus data output selections, parameter/monitor IDs can be assigned to these registers and then read over the desired
fieldbus network word for process data. Any drive parameter with an ID can be read over these values.
Default values for process data in:
Process data IN1 = NULL = ID 0;
Process data IN2 = FB PI Set Point1= ID 2542;
Process data IN3 = FB PI Feedback1= ID 2550;
Process data IN4 = Acceleration time 1= ID 103;
Process data IN5 = Deceleration time 1= ID 104;
Process data IN6 = Current limit= ID 107;
Process data IN7 = NULL= ID 0; or
Process data IN8 = NULL= ID 0.
FB process data input 5 selection
P10.1.5 b
0
Minimum value:
Description: With the fieldbus data output selections, parameter/monitor IDs can be assigned to these registers and then read over the desired
fieldbus network word for process data. Any drive parameter with an ID can be read over these values.
Default values for process data in:
Process data IN1 = NULL = ID 0;
Process data IN2 = FB PI Set Point1= ID 2542;
Process data IN3 = FB PI Feedback1= ID 2550;
Process data IN4 = Acceleration time 1= ID 103;
Process data IN5 = Deceleration time 1= ID 104;
Process data IN6 = Current limit= ID 107;
Process data IN7 = NULL= ID 0; or
Process data IN8 = NULL= ID 0.
FB process data input 6 selection
P10.1.6 b
0
Minimum value:
Description: With the fieldbus data output selections, parameter/monitor IDs can be assigned to these registers and then read over the desired
fieldbus network word for process data. Any drive parameter with an ID can be read over these values.
Default values for process data in:
Process data IN1 = NULL = ID 0;
Process data IN2 = FB PI Set Point1= ID 2542;
Process data IN3 = FB PI Feedback1= ID 2550;
Process data IN4 = Acceleration time 1= ID 103;
Process data IN5 = Deceleration time 1= ID 104;
Process data IN6 = Current limit= ID 107;
Process data IN7 = NULL= ID 0; or
Process data IN8 = NULL= ID 0.
FB process data input 7 selection
P10.1.7 b
0
Minimum value:
Description: With the fieldbus data output selections, parameter/monitor IDs can be assigned to these registers and then read over the desired
fieldbus network word for process data. Any drive parameter with an ID can be read over these values.
Default values for process data in:
Process data IN1 = NULL = ID 0;
Process data IN2 = FB PI Set Point1= ID 2542;
Process data IN3 = FB PI Feedback1= ID 2550;
Process data IN4 = Acceleration time 1= ID 103;
Process data IN5 = Deceleration time 1= ID 104;
Process data IN6 = Current limit= ID 107;
Process data IN7 = NULL= ID 0; or
Process data IN8 = NULL= ID 0.
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES
Maximum value: 12,464
12,464
Maximum value:
12,464
Maximum value:
12,464
Maximum value:
Chapter 7- Multi-purpose application
Default value:
Default value:
Default value:
Default value:
MN040049EN—September 2021 www.eaton.com
ID 2536
103
ID 2537
104
ID 2538
107
ID 2539
0
215