Eaton PowerXL DM1 Series Applications Manual page 31

Table 8. Operate mode - O (for remote keypad only).
Code Parameter
O1 Output frequency
O2 Freq. reference
O3 Motor speed
O4 Motor current
O5 Motor torque
O6 Motor power
O7 Motor voltage
O8 DC-link voltage
O9 Unit temperature
O10 Motor temperature
Keypad reference
R11
b
PI keypad setpoint 1
R12
b
Parameter value will be set to be default when changing macros.
b
Table 9. Parameters (Cont.). .
P1 - Basic
parameters.
Minimum frequency
P1.1 b
0.00 Hz
Minimum value:
Description: Defines the lowest frequency at which the drive will operate. This setting will limit other frequency parameter settings.
1 = Fire mode minimum frequency.
2 = Derag.
3 = MPFC staging frequency.
4 = MPFC master fixed frequency.
5 = Prime pump frequency.
6 = Prime pump frequency 2.
Maximum frequency
b
P1.2
Minimum value: 0.00 Hz
Description: Defines the highest frequency at which the drive will operate. This will limit other frequency parameters.
1 = Keypad reference.
3 = Motor potentiometer.
3 = Jog speed.
4 = 2nd stage ramp frequency.
5 = Fire mode minimum frequency.
6 = Derag.
7 = MPFC staging frequency.
8 = MPFC master fixed frequency.
9 = Prime pump frequency.
10 = Prime pump frequency 2.
11 = Preset speed frequency.
12 = Frequency limit value.
13 = Reference limit value.
14 = Speed control_fs2.
15 = Stall frequency limit.
16 = 4 mA fault frequency.
17 = MPFC de-staging frequency.
18 = Pipe fill loss frequency low.
19 = Pipe fill loss frequency high.
20 = Broken pipe frequency limit.
Accel. time 1
P1.3 b
Minimum value: 0.1 s
Description: Defines the time required for the output frequency to accelerate from zero frequency to maximum frequency.
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com
Min. Max. Unit
Hz
Hz
rpm
A
%
%
V
V
ºC
%
Hz
Minimum Maximum
frequency frequency
Varies
PI process PI process
minimum maximum
Maximum value:
Maximum value:
Maximum value:
Default ID
1
24
2
3
4
5
6
7
8
9
0.00 141
0.00 1307
400.00 Hz
Default value:
400.00 Hz Default value:
3,000.0 s Default value:
Chapter 4 - Standard
Note
ID 101
0.00 Hz
ID 102
MaxFreqMFG
ID 103
20.0 s
21