Chapter 6 - Pump Control Application; Introduction; I/O Controls - Eaton PowerXL DM1 Series Applications Manual

Chapter 6 - Pump control application

Chapter 6 - Pump control application

Introduction

The pump application builds on the features included in
standard. In addition to all of the features in the standard
application, the pump application provides features specific
for pumping applications and pump related protective
features.
Pump application includes functions:
Pump derag mode;
•
Valve control;
•
Backspin control;
•
Minimum run time;
•
Separate minimum frequency ramp time;
•
Multi-pump control;
•
Pipe fill mode;
•
Loss of prime detection; and
•
Broken pipe detection.
•

I/O controls

"Function to terminal" (FTT) programming
The design behind programming of the digital inputs and
outs of the DM1 uses "function to terminal" programming.
It is composed of a terminal, be it a relay output or a digital
output, that is assigned a parameter. Within that parameter,
it has different functions that can be set.
90
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com