Eaton PowerXL DM1 Series Applications Manual page 92

Chapter 5 - Fan control application
Table 33. Serial communication (Cont.).
P11.5.6
Protocol status
Minimum value: N.A.
Options: 0 = Not configured;
1 = Operational; or
2 = Diagnostics.
Description: This parameter specifies the protocol status for SWD card.
P11.6 - Bluetooth.
P11.6.1
Bluetooth enabled
Minimum value: N.A.
0 = Disabled; or
Options:
1 = Enabled.
Description: Bluetooth enabled.
Bluetooth broadcast mode
P11.6.2 b
Minimum value: N.A.
0 = Off; or
Options:
1 = On.
Description: Bluetooth broadcast mode.
P11.6.3
Bluetooth pairing reset
Minimum value: N.A.
Options: 0 = Not reset; or
1 = Reset.
Bluetooth pairing reset.
Description:
Parameter value can only be changed after the drive has stopped.
a
Parameter value will be set to be default when changing macros.
b
Table 34. Ethernet communication (Cont.).
P12.1 - Basic settings (*DM1 Pro).
IP address mode (*DM1 Pro)
P12.1.1 a
N.A.
Minimum value:
Options: 0 = Static IP; or
1 = DHCP with AutoIP.
Description: This parameter defined the IP address configuration mode for EIP/modbus TCP.
P12.1.2 Active IP address
Minimum value: N.A.
Description: Reads the current active IP address.
P12.1.3 Active subnet mask
Minimum value: N.A.
Description: Reads the current active subnet mask.
P12.1.4
Active default gateway
Minimum value: N.A.
Description: Reads the current active default gateway.
P12.1.5
MAC address
N.A.
Minimum value:
Description: Reads the current MAC address.
82
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com
Maximum value:
Maximum value:
Maximum value:
Maximum value:
.
Maximum value:
Maximum value:
Maximum value:
Maximum value:
Maximum value:
N.A. Default value:
N.A. Default value:
N.A. Default value:
N.A. Default value:
N.A.
Default value:
N.A. Default value:
N.A. Default value:
N.A. Default value:
N.A.
Default value:
ID 2612
0
ID 1895
0
ID 2920
0
ID 2935
N.A.
ID 1500
0
ID 1507
N.A.
ID 1509
N.A.
ID 1511
N.A.
ID 1513
N.A.