Eaton PowerXL DM1 Series Applications Manual page 47

Table 16. Setpoint (Cont.).
PI setpoint 1 sleep level
P7.2.2.6 b
Minimum value: MinFreqMin Hz
Description: Defines the level of which the unit value is used to look at to go into the sleep mode. When the unit drops below this level for the sleep
delay time, it will put the drive into the sleep mode.
SP1 sleep mode over cycle time
P7.2.2.7 b
Minimum value: 0
Description: Defines the count the drive come in and out of sleep mode. If multiple times done in this time frame, the drive would trip on "pump over
cycle" fault.
One cycle is defined when the drive transfers from normal mode to sleep mode.
0 value means do not do the sleep over cycle check and clear "pump over cycle" fault.
SP1 sleep mode maximum cycle time
P7.2.2.8 b
Minimum value: 0 s
Defines the maximum time for sleep over cycle checking.
Description:
Parameter value can only be changed after the drive has stopped.
a
Parameter value will be set to be default when changing macros.
b
Table 17. Feedback (Cont.).
.
P7.3.2 - Feedback 1.
PI feedback 1 source
P7.3.2.1 a
Minimum value: N.A.
Options: 0 = Not used;
1 = AI;
2 = Drive reference pot;
3 = FB process data input 1; or
11 = FB PI feedback.
Defines where feedback signal is being fed into the drive, via analog or fieldbus data value.
Description:
Parameter value can only be changed after the drive has stopped.
a
Table 18. Serial communication (Cont.).
P11.1 - Basic settings.
Serial communication
P11.1.1 a
N.A.
Minimum value:
Options: 0 = Modbus RTU;
1 = BACnet MSTP (*DM1 PRO); or
2 = SWD (*DM1 PRO).
Description: This parameter defines the communication protocol for RS-485.
P11.2 - Modbus RTU.
Slave address
P11.2.1 a
1
Minimum value:
Description: This parameter defines the slave address for RS-485 communication.
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com
Maximum value:
Maximum value:
Maximum value:
Maximum value:
.
Maximum value:
Maximum value:
MaxFreq Hz Default value:
10 Default value:
3,600 s Default value:
N.A. Default value:
N.A.
Default value:
247
Default value:
Chapter 4 - Standard
ID 2450
0.00 Hz
ID 1842
0
ID 1843
300 s
ID 1332
2
ID 586
0
ID 587
1
37