Page 2
REGARDING THE INFORMATION, RECOMMENDATIONS AND DESCRIPTIONS CONTAINED HEREIN. In no event will Eaton Electrical Inc. be responsible to the purchaser or user in contract, in tort (including negligence), strict liability or otherwise for any special, indirect, incidental or consequential damage or loss whatsoever, including but not...
13.2 Output Wiring ................12 POWERXL DG1 AND SVX ENCLOSED DRIVES INSTRUCTIONS IL040060EN April 2020 www.eaton.com...
Page 4
Disconnect power before checking controllers or • performing maintenance Be sure equipment is properly earthed • Wear safety glasses whenever working on electronic • controllers or rotating machinery POWERXL DG1 AND SVX ENCLOSED DRIVES INSTRUCTIONS IL040060EN April 2020 www.eaton.com...
For bypass designs, if a burnout of the current element of the overload relay occurs, the complete overload relay must be replaced. POWERXL DG1 AND SVX ENCLOSED DRIVES INSTRUCTIONS IL040060EN April 2020 www.eaton.com...
0-208VAC 3PH 0-320Hz 46.2A MN04012005E, MN04003006E, MN04002005E, MN032005EN Max H.P. 273A, 100hp Order No: G.O. Number Here Figure 2. Information Label under Keypad Alternate Rating label may be used POWERXL DG1 AND SVX ENCLOSED DRIVES INSTRUCTIONS IL040060EN April 2020 www.eaton.com...
Each Catalog number consists of 18 digits, each digit or combination of digits in the catalog number indicates a rating, feature or option. The catalog is located in PDF format on the website at www.eaton.com/drives EGS 3D5 1 D 1...
Page 8
4 Output contactor not available with bypass. Bypass comes standard with output contactor. 5 Pilot devices are 22 mm standard. 30 mm options are available as engineered to order through the Bid Manager tool. POWERXL DG1 AND SVX ENCLOSED DRIVES INSTRUCTIONS IL040060EN April 2020 www.eaton.com...
7.2 EGF and CFX filtered design codes, or equivalent. Design that uses either an EATON DG1 VFD (EGF) or and EATON SVX VFD (CFX) and a passive filter for 5% - 7% Total Harmonic Distortion. Designs can be either non-bypass or 6. ENVIRONMENTAL RATINGS bypass designs.
This option uses the 10 Vdc reference from the VFD to generate a 0–10V signal at the analog voltage input signal terminal of the VFD. POWERXL DG1 AND SVX ENCLOSED DRIVES INSTRUCTIONS IL040060EN April 2020 www.eaton.com...
See schematic provided with unit for details and • more information on how these features operate. control logic. Enclosure must be grounded using input and output • studs provided. POWERXL DG1 AND SVX ENCLOSED DRIVES INSTRUCTIONS IL040060EN April 2020 www.eaton.com...
See table based on wire size used IL29C106F L1,L2,L3 RDC316T TA1600RD See table based on wire size used IL29C107L L1,L2,L3 RDC320T TA2000RD See table based on wire size used IL29C107L POWERXL DG1 AND SVX ENCLOSED DRIVES INSTRUCTIONS IL040060EN April 2020 www.eaton.com...
Page 13
538043a L1,L2,L3 Disc R9N3600FJ LK3R9FN See disc terminal table based on wire size 538040a 538043a L1,L2,L3 Disc R9N3800FL LK3R9FN See disc terminal table based on wire size 538040a 538043a POWERXL DG1 AND SVX ENCLOSED DRIVES INSTRUCTIONS IL040060EN April 2020 www.eaton.com...
Page 16
16MM HEX IL03407006Z MN03407005Z T1,T2,T3 OL Relay 575V 200.00 XTOB220HC1 16MM HEX IL03407006Z MN03407005Z CT = current transformer BM = bimetallic CMC= Inclued in the Type E disconnect- BCP table POWERXL DG1 AND SVX ENCLOSED DRIVES INSTRUCTIONS IL040060EN April 2020 www.eaton.com...
Page 17
5/16 HEX IL29C402D L1,L2,L3 HMCP250K5C TA250KB See table based on wire size used 5/16 HEX IL29C402D L1,L2,L3 HMCP400R5C TA400K See table based on wire size used 5/16 HEX IL29C403F POWERXL DG1 AND SVX ENCLOSED DRIVES INSTRUCTIONS IL040060EN April 2020 www.eaton.com...
Need help?
Do you have a question about the PowerXL DG1 and is the answer not in the manual?
Questions and answers