JANUS 2020 Hand-Held Computer User's Manual (4MB)
LRC
Purpose:
Default:
Syntax:
Scan:
MSI
Purpose:
Default:
Syntax:
12-72
The Longitudinal Redundancy Check character is an error-checking character
that you can append to transmitted and received blocks of data.
Note: You must select the communications port and protocol before you set the
parameters that define the protocol. For help, see "Communications Protocol,
Configure" earlier in this chapter.
Disabled
IFdata
Acceptable values for data are:
0
LRC disabled
1
LRC enabled
One of these bar codes:
Disable LRC
*$+IF0*
*$+IF0*
Enable LRC
*$+IF1*
*$+IF1*
Enables or disables decoding of MSI symbology. MSI code is similar to Plessey
code. MSI code includes a start pattern, data characters, one or two check
digits, and a stop pattern.
Disabled
CNdata
BC
NF