Lrc; Msi; Lrc (Longitudinal Redundancy Check) - Intermec Janus 2020 User Manual

JANUS 2020 Hand-Held Computer User's Manual

LRC

Purpose: The Longitudinal Redundancy Check character is an error-checking character
that you can append to transmitted and received blocks of data.
Note: You must select the communications port and protocol before you set the
parameters that define the protocol. For help, see "Communications Protocol,
Configure" earlier in this chapter.
Default: Disabled
Syntax: IFdata
Acceptable values for data are:
0
1
Scan: One of these bar codes:

MSI

Enables or disables decoding of MSI symbology. MSI code is similar to Plessey
Purpose:
code. MSI code includes a start pattern, data characters, one or two check
digits, and a stop pattern.
Default: Disabled
Syntax: CNdata
12-72
LRC disabled
LRC enabled
Disable LRC
*$+IF0*
*$+IF0*
Enable LRC
*$+IF1*
*$+IF1*
BC
N F