Beep Frequency - Intermec JANUS 2020 User Manual

Beep Duration (continued)
3. Scan one of these bar codes to set the duration for the low or high beep:
4. Scan this bar code:

Beep Frequency

Purpose: Defines the individual frequencies of the default reader beeps. There are two
types of beeps:
• Low beep
• High beep
Default: 1000 Hz for the low beep
2000 Hz for the high beep
Syntax: BFdata
Acceptable values for data are from 20 to 20,000 Hz (20 KHz).
Note: If you set the frequency outside the range of 100 Hz to 10,000 Hz, the beeps are
inaudible.
NF
*6*
*6*
*8*
*8*
Low Beep
*L*
*L*
Exit Accumulate Mode
*-/*
*-/*
BC
Configuration Command Reference
*7*
*7*
*9*
*9*
High Beep
*H*
*H*
12
12-13