Command Line Switches - Intermec 6220 Technical Reference

SECTION 2

Command Line Switches

Norand Tethered Scanner Driver vx.xx
(C) 1995–1999 Intermec Technologies Corporation
All rights reserved.
H2THRSCN [<switches>]
" NOTE:
–SCANBIOS requires the program to use the API calls to enable and disable the scanner.
The message at load time will be "SCANBIOS API enabled."
EXAMPLE: The following is an example command line for the tethered scanner:
H2THRSCN [–E] [–R]
6220 Hand-Held Computer Technical Reference
DOS Device Drivers
2-19