Understanding The Reader's Audio Signals - Intermec Janus 2020 User Manual

Understanding the Reader's Audio Signals

The JANUS reader has a beeper and internal speakers to sound audio signals
or beep sequences as you use the reader. For example, you will hear a low
beep tone each time you enter or scan a valid command. The next table
explains the purpose of each beep sequence you may hear.
You can change the beep volume, frequency, and duration to meet the needs of
your working environment. For example, use a quiet beep in a library, a loud
beep in a manufacturing plant, or a unique beep to distinguish the reader from
other devices. For help, see the beeper commands in Chapter 12,
"Configuration Command Reference."
Beep Sequence
Low beep
High beep
Three low beeps
Low beep, high beep,
low beep
High beep, low beep,
high beep
Three high beeps
Two low beeps, two
high beeps
Medium beep, high
beep
39 nugget ANF
Description
You entered a valid command or the data you entered
was stored.
If the reader sounds a low beep after you insert a PC
card, the reader recognized the card, but cannot read it.
You need to configure the reader or format the card. For
help, see Chapter 4, "Using PC Cards in the Reader."
You entered valid data, the reader decoded a label, or
the reader decoded the last row of a two-dimensional
symbology. When you cold boot the reader, you hear a
high beep once the power-on self test (POST) has
executed successfully.
You entered an invalid command or data, or the reader
detected an IRL syntax error while compiling. For help,
see "Running IRL Programs" in Chapter 10.
The reader detected an IRL runtime error (a nonfatal
error). For help, see "Running IRL Programs" in
Chapter 10.
There is an input or output (I/O) error. For help, see
"Networking or Communicating With the Reader" in
Chapter 10.
There is a configuration error or a fatal IRL error. For
help, see "Running IRL Programs" in Chapter 10.
The reader sounds this beep sequence whenever you
update the reader's configuration.
The reader recognized the PC card that you inserted.
You can begin using the card.
BC
Learning How to Use the Reader
2
2-31