Activate - Intermec Janus 2020 User Manual

Activate

Purpose: Activates the communications protocol and the communications port you
selected. Each port can only have one active protocol at a time.
Note: The reader cannot use the active protocol to communicate until you load the
corresponding protocol handler. For help, see "Configuring the Reader for
Communications" in Chapter 6.
Default: Point-to-Point
PAdata
Syntax:
Acceptable values for data are:
0
1
2
3
7
9
Scan: One of these bar codes:
User-Defined Protocol
*$+PA0*
*$+PA0*
Polling Mode D Protocol
*$+PA2*
*$+PA2*
PC Standard Protocol
*$+PA7*
*$+PA7*
NF
User-Defined
Point-to-Point
Polling Mode D
Multi-Drop
PC Standard
None
BC
Configuration Command Reference
Point-to-Point Protocol
*$+PA1*
*$+PA1*
Multi-Drop Protocol
*$+PA3*
*$+PA3*
No Protocol
*$+PA9*
*$+PA9*
12
12-41