Aff (Affirmative Acknowledge) - Intermec Janus 2020 User Manual

JANUS 2020 Hand-Held Computer User's Manual

AFF (Affirmative Acknowledge)

Purpose: Enables or disables the handshake event that is an affirmative acknowledge to
a message. You must enable both AFF and NEG to have a valid configuration.
Note: You must select the communications port and protocol before you set the
parameters to define that protocol. For help, see "Communications Protocol,
Configure" later in this chapter.
Default: Disabled
Syntax: PGdata
where data can be any ASCII character.
Scan: To disable AFF, scan this bar code:
Disable AFF
*$+PG*
*$+PG*
Or: To set AFF to an ASCII character:
1. Scan this bar code:
2. Scan a bar code for data from the "Full ASCII Bar Code Chart" in
3. Scan this bar code:
12-8
Enter Accumulate Mode / Set AFF
*+/$+PG*
*+/$+PG*
Appendix C.
Exit Accumulate Mode
*-/*
*-/*
BC
N F