IRL Program, Download
Purpose:
Downloads the program you specify from the host computer to the reader. For
help, see "Downloading an IRL Program" in Chapter 7.
The command renames the program to {IRL-1}.IRL and copies it to the
directory specified by the IM_IRLPROG path in your AUTOEXEC.BAT file. If
the program path is on a nonwritable drive, the program is copied to the data
path. If there is an {IRL-1}.IRL program already in the directory, it is
overwritten. If the command detects an error, an error message appears and
control returns to the IRL Desktop.
To download an IRL program, send a Start of Program (SOP) character
followed by the program to be downloaded from the host computer. You can
set the SOP character in the reader's configuration. The default is <SI>. For
help, see "IRL SOP" in Chapter 12.
You can also use PC-IRL, Collect, DCM, DFM, or Interscan to download IRL
programs. For help, see the product's manual.
Note: You can use this command only from the IRL Desktop.
From Host:
<SOP>
Keypad:
Not supported
IRL Command:
Not supported
Scan:
Not supported
IRL Program, Exit
Purpose:
Exits the IRL program that is running. For help, see "Exiting an IRL Program"
in Chapter 7.
From Host:
/$
Keypad:
Press the application break sequence. For help, see "Breaking Out of an
Application" in Chapter 9.
IRL Command:
Not supported
Scan:
Exit IRL Program
*/$*
*/$*
BC
NF
Reader Command Reference
11
11-11