Irl Pak (Program Acknowledge) - Intermec Janus 2020 User Manual

IRL PAK (Program Acknowledge)

Purpose: The reader sends this character to the host computer to acknowledge an IRL
program that it has received.
Note: You must select the communications port and protocol before you set the
parameters that define the protocol. For help, see "Communications Protocol,
Configure" earlier in this chapter.
Default: RS (record separator)
Syntax: ZAdata
where data can be any ASCII character.
Scan: To disable PAK, scan this bar code:
Disable PAK
*$+ZA*
*$+ZA*
Or: To set the PAK to an ASCII character:
1. Scan this bar code:
2. Scan a bar code for data from the "Full ASCII Bar Code Chart" in
3. Scan this bar code:
NF
Enter Accumulate Mode / Set PAK
*+/$+ZA*
*+/$+ZA*
Appendix C.
Exit Accumulate Mode
*-/*
*-/*
BC
Configuration Command Reference
12
12-63