Enter And Exit Accumulate Mode - Intermec Janus 2020 User Manual

JANUS 2020 Hand-Held Computer User's Manual

Enter and Exit Accumulate Mode

Accumulate mode is used to accumulate all scanned data in the reader's data
buffer. When you exit Accumulate mode, the accumulated data is "entered" as
a data record. The buffer is cleared by one of these commands:
• Exit accumulate command
• Enter command
• Clear command
• Any type of reset
Up to 250 characters can be held in the buffer. If the data record count exceeds
250 characters, the last bar code read is rejected and the reader sounds an error
beep.
Purpose: Enters Accumulate mode. If you press any keys when using the Enter
Accumulate command, the keystrokes are accumulated as data.
From Host: Not supported
Keypad: Not supported
IRL Command: Not supported
Scan:
Enter Accumulate Mode
*+/*
*+/*
Purpose: Exits Accumulate mode and transmits the current data record. If no data has
been accumulated, an empty data record is entered.
From Host: Not supported
Keypad: Not supported
IRL Command: Not supported
Scan:
Exit Accumulate Mode
*-/*
*-/*
11-8
BC
N F