Eof (End Of File) - Intermec Janus 2020 User Manual

JANUS 2020 Hand-Held Computer User's Manual

EOF (End of File)

Purpose: Defines the end of file character for the communications port when
transmitting a file from the reader.
Note: You must select the communications port and protocol before you set the
parameters to define that protocol. For help, see "Communications Protocol,
Configure" earlier in this chapter. The configured option may be overridden when you
use certain communications protocols. The EOF will not be overridden when you use
User-Defined protocol.
Default: Disabled
Syntax: FAdata
where data can be any ASCII character.
Scan: To disable EOF, scan this bar code:
Disable EOF
*$+FA*
*$+FA*
To set EOF to an ASCII character:
Or:
1. Scan this bar code:
2. Scan a bar code for data from the "Full ASCII Bar Code Chart" in
3. Scan this bar code:
12-52
Enter Accumulate Mode / Set EOF
*+/$+FA*
*+/$+FA*
Appendix C.
Exit Accumulate Mode
*-/*
*-/*
BC
N F