Intermec Janus 2020 User Manual page 106

JANUS 2020 Hand-Held Computer User's Manual
4. Copy all the files you want to add or edit to your working directory.
5. Make sure your current directory is the one where you installed the Auto-
6. Type this command:
7. Auto-Loader runs Intersvr on the host computer. When you see the
8. When the update is complete, the reader reboots automatically. Exit
9. Interlnk is still loaded in the reader's memory. If you need the conventional
Auto-Loader saves all the files contained in the image file to the
NEWDRV_C\C_FINAL directory and saves the image file in the
NEWDRV_C\IMAGE directory. Auto-Loader overwrites these directories each
time you use a LOAD or MAKE command, with the exception that
LOADIMG.BAT and LOADXIMG.BAT preserves the image file for successive
use.
3-16
If you want to edit files that are on drive C including the startup files, you
can use Interlnk to copy files to your working directory on the host
computer. Then you can edit the files and include them in the new image
file for drive C. You can also copy files from the companion disks that are
shipped with the reader.
Loader batch files, or make sure that directory is listed in the path
statement of your host computer's AUTOEXEC.BAT file.
loadadd [ path\ ] filename [ path\filename path\filename... ]
where:
is the drive and directory of the file or files to include in the
path
image file and load to the reader. If you do not include a path,
the current directory is used.
filename is the name of the file or files to include in the image file and
load to the reader.
You can include multiple path\filename and path\*.* parameters in the
command. The path\*.* parameter loads all the files in a directory.
For example:
loadadd c:\janus\config.sys c:\atadrv\*.*
Interlnk Server Status screen on the host computer, press
warm boot the reader and load Interlnk into memory. Auto-Loader begins
updating drive C.
Intersvr on the host computer by pressing Alt-F4. This message appears:
Drive C: Installation process completed.
memory to run other applications, press
reader. Because Intersvr is no longer running on the host computer, a warm
boot does not cause Interlnk to load itself into the reader's memory.
BC
N F
c:\data\*.*
to
to warm boot the