Intermec Janus 2020 User Manual page 459

Default Configuration
The next table shows the reader's default configuration. You can use the
Interactive Configuration application (IC.EXE) program to set the reader to the
default configuration. For help, see "Restoring the Reader's Default
Configuration" in Chapter 5.
Bar Code Symbologies
Parameter
Codabar
Code 11
Code 16K
Code 2 of 5
Code 39
Code 49
Code 93
Code 128
Interleaved 2 of 5
MSI
Plessey
UPC/EAN
Communications
Parameter
Address, Multi-Drop
AFF (Affirmative Acknowledge)
Baud Rate
Communications Dock Port
Communications Port, Select COM Port
Communications Port, UART Restore
BC
NF
Default
Standard, ABCD start/stop transmitted
Enabled with two check digits
Standard
Disabled
Full ASCII Code 39 enabled with no check digit
Enabled, Function Codes 1 and 3 disabled, Function Code 2
set to CR LF
Enabled
Standard
Variable length with a check digit
Disabled
Disabled
UPC-A/EAN-13 enabled, UPC-E and EAN-8 enabled,
supplementals allowed, transmit check digit, transmit
number system digit, and retain leading zero for UPC-A
Default
A
Disabled
9600
Network
COM1
00 Hex
Reader Specifications
A
A-7