Intermec Janus 2020 User Manual page 70

JANUS 2020 Hand-Held Computer User's Manual
2-28
To use Control mode
1. To enter Control mode, press and hold
keys. The and
2. Press any of these key sequences to adjust the display.
Press To Adjust the Display
Make the display contrast darker.
Make the display contrast lighter.
Turns the display backlight on or off.
Change the scroll line to line 8.
Change the scroll line to line 16.
Change the scroll line to line 25.
Change the characters to normal height.
Change the characters to double height.
Change the viewport to automatically follow the cursor.
Change the viewport so that you must manually move it.
Make the beep volume quieter.
Make the beep volume louder.
3. Press to exit Control mode. The
reader's display.
Note: The display parameters you set in Control mode are reset to the default
configuration value when you warm boot the reader. Display Contrast is reset only
when you cold boot the reader.
icons appear on the reader's display.
and
, press , and then release both
icons disappear from the