Keypad, Numeric - Intermec Janus 2020 User Manual

Keypad, Numeric

Purpose: Defines the ability to enable the numeric keypad from the reader keypad as
described in Chapter 2, "Learning How to Use the Reader." You can set the
reader to simulate the numeric keypad on a 102-key PC keyboard. Press
command to prohibit the use of the numeric keypad if you want to avoid
inadvertently enabling the number pad.
Permit entering number pad
Default:
Syntax: KDdata
Acceptable values for data are:
0
1
One of these bar codes:
Scan:
Prohibit Entering Number Pad
*$+KD0*
*$+KD0*
Permit Entering Number Pad
*$+KD1*
*$+KD1*
NF
to enable the reader's number pad. You can use the Keypad, Numeric
Prohibit entering number pad
Permit entering number pad
BC
Configuration Command Reference
12
12-71