Intermec Janus 2020 User Manual page 519

The next tables describe how the two LOADADD commands work depending
on the information you include in the command and whether you installed
Auto-Loader for a DOS NLS country.
Command:
loadadd nls
DOS NLS Support? Description
No • Creates an image file that contains the three startup files in
• Loads the image file onto the reader's drive C.
• Overwrites only the startup files on drive C.
Yes • Creates an image file that contains the three startup files in
• Appends commands to AUTOEXEC.BAT and
• Loads the image file onto the reader's drive C.
• Overwrites only the startup files on drive C.
Command:
loadadd path \ filename [ path \ filename... ]
DOS NLS Support? Description
No • Creates an image file that contains files you specify in the
• Loads the image file onto the reader's drive C.
• Overwrites files on drive C only if the command contains a
Yes • Creates an image file that contains files you specify in the
• Appends commands to AUTOEXEC.BAT and
• Loads the image file onto the reader's drive C.
• Overwrite files on drive C only if the command contains a
BC
NF
Software Utility Reference
C_FILES\COMMON and all files currently on drive C.
C_FILES\COMMON and all files currently on drive C.
CONFIG.SYS to support the DOS NLS language.
command and all files currently on drive C.
file with the same name.
command, all files currently on drive C, and the three
startup files in C_FILES\COMMON unless you specify
startup files in the command.
CONFIG.SYS to support the DOS NLS language.
file with the same name.
D
D-13