Intermec Janus 2020 User Manual page 293

5. A record counter on the reader display counts the data as it is transmitted
to the host computer. The record counter stops updating when the reader is
finished downloading the data.
6. Choose your next step. You can cold boot the reader by choosing the
Reboot command and pressing
If you dumped the 640K because the Boot Loader menu displayed the "Bad
BIOS Checksum" error message or because the flash memory was
corrupted, you must load the flash memory now. For help, see the next
section, "Loading Flash Memory."
BC
NF
Booting and Resetting the Reader
. Then you can use the reader.
9
9-15