Intermec Janus 2020 User Manual page 449

6. (Optional) Scan one of these bar codes to set the fifth digit:
Discard Check Digit
*0*
*0*
7. (Optional) Scan one of these bar codes to set the sixth digit:
Discard Number System Digit
*0*
*0*
Note: If you discard the number system digit, one leading digit is discarded from
UPC-A, UPC-E, and EAN-8, and two leading digits are discarded from EAN-13.
8. (Optional) Scan one of these bar codes to set the seventh digit:
Discard Leading Zero for UPC-A
*0*
*0*
Note: This option applies only when you enable UPC-A/EAN-13.
9. Scan this bar code:
Exit Accumulate Mode
*-/*
*-/*
BC
NF
Configuration Command Reference
Transmit Check Digit
*1*
*1*
Transmit Number System Digit
*1*
*1*
Transmit Leading Zero for UPC-A
*1*
*1*
12
12-99