Intermec Janus 2020 User Manual page 225

When you start Communications Manager, the main menu appears. The menu
bar contains three menus:
Communications
File Cfg Stat
2020U.071
File Select the File menu to designate which port to communicate through,
and to transmit or receive ASCII files. The File menu also has a command to
display the software version. You quit Communications Manager by selecting
Exit from this menu.
Cfg Select the Cfg menu to set the communications protocol for each of the
reader's COM ports and define the parameters for each selected protocol. See
Chapter 12, "Configuration Command Reference," for a list of the protocols
and their parameters.
Stat Select the Stat menu to view the status of the selected COM port, such as
the protocol and parameters being used and whether the port is active or
inactive.
Communications
File Cfg Stat
Port...
Transmit...
Receive...
About
Exit
2020U.073
The File menu contains these commands:
Port Lets you select the COM port to communicate through. For help, see
"Identifying JANUS COM Ports" earlier in this chapter.
Transmit Transmits the selected file through the designated COM port. A
screen displays the status of the transfer.
Receive Stores the file it receives from the designated COM port under the
selected filename. A screen displays the status of the transfer.
About Displays the software version of Communications Manager.
Exit Exits Communications Manager.
BC
NF
Networking the Reader
6
6-39