Irl Pss (Program Statement Separator) - Intermec Janus 2020 User Manual

JANUS 2020 Hand-Held Computer User's Manual

IRL PSS (Program Statement Separator)

Purpose: Separates individual IRL program statements from each other.
Note: Do not define PSS as the same character used for EOM. You must select the
communications port and protocol before you set the parameters that define the
protocol. For help, see "Communications Protocol, Configure" earlier in this chapter.
Default: CR (carriage return)
Syntax: XEdata
where data can be any ASCII character.
Scan: To disable PSS, scan this bar code:
Disable PSS
*$+XE*
*$+XE*
To set the PSS to an ASCII character:
Or:
1. Scan this bar code:
2. Scan a bar code for data from the "Full ASCII Bar Code Chart" in
3. Scan this bar code:
12-64
Enter Accumulate Mode / Set PSS
*+/$+XE*
*+/$+XE*
Appendix C.
Exit Accumulate Mode
*-/*
*-/*
BC
N F