Intermec Janus 2020 User Manual page 147

3. Press to select option 3. You will see this information.
Erase a partition.
Drive Beg address
G O
Which drive would you like to select?
Drive =
4. Press the letter of the PC card drive. For example, press
card in drive G. The program displays the next prompt:
This command will erase drive G: entirely.
Do you want to continue (Y/N)?
5. Press to begin erasing the flash card. The program displays the next
messages and the percent complete as it erases the card. Do not remove the
flash card while the program is erasing the card.
DO NOT REMOVE CARD WHILE ERASING!
Erasing card.
100% complete
Press return for main menu.
6. Press to return to the MCFORMAT main menu.
7. Press to exit MCFORMAT. You are ready to format the flash card.
BC
NF
Using PC Cards in the Reader
End address Type Status
4194303 FTL Formatted
4
Size
4096K
2020U.172
to format a flash
4-17