Intermec Janus 2020 User Manual page 296

JANUS 2020 Hand-Held Computer User's Manual
11. Press any key to skip the online instructions about checking connections to
12. When the upgrade program finishes, it indicates the upgrade was
13. After you return to the DOS prompt on your PC, the reader displays the
14. Reload any files or programs you had on drives C and E. For help, see
15. If the reader operates in a language other than English, you must configure
9-18
The upgrade program begins executing. It takes a little over 10 minutes to
update or upgrade all of the reader's flash memory.
the reader and putting the reader in Load mode. You already performed
those tasks. The online instructions are provided for users who do not have
these printed instructions.
successful. Press any key to return to the DOS prompt on your host
computer. The files are deleted from the temporary work space on the host
computer.
message, "System Has Reset, Please Reboot." Choose Reboot from the Boot
Loader menu and press
Caution
When the reader performs a cold boot, all files on the physical RAM
drive are destroyed.
Conseil
Lorsque le lecteur effectue un amorçage à froid, tous les fichiers présents
sur le lecteur de la mémoire RAM physique sont supprimés.
"Learning How to Change the Contents of Drive C" in Chapter 3.
Note: If you are upgrading to a new version of software, do not reload the startup
files and drivers you used for the previous release.
the reader to use that language. Use Auto-Loader as described in Chapter 8,
"Preparing the Reader for International Use."
BC
N F
to cold boot the reader.