Intermec Janus 2020 User Manual page 448

JANUS 2020 Hand-Held Computer User's Manual
UPC/EAN (continued)
Scan: To disable UPC/EAN, scan this bar code:
Disable UPC/EAN
*$+CE000000*
*$+CE000000*
Or: To enable UPC/EAN:
1. Scan this bar code:
2. Scan one of these bar codes to set the first digit:
3. Scan one of these bar codes to set the second digit:
4. Scan one of these bar codes to set the third digit:
5. Scan one of these bar codes to set the fourth digit:
12-98
Enter Accumulate Mode / Enable UPC/EAN
*+/$+CE*
*+/$+CE*
Disable UPC/EAN-13
*0*
*0*
Enable UPC-A Only
*2*
*2*
Disable UPC-E
*0*
*0*
Disable EAN-8
*0*
*0*
Supplementals Not Allowed
*0*
*0*
BC
N F
Enable UPC/EAN-13
*1*
*1*
Enable UPC-E
*1*
*1*
Enable EAN-8
*1*
*1*
Supplementals Allowed
*1*
*1*