Intermec Janus 2020 User Manual page 291

To exit Storage mode
1. Install the reader's NiCad battery pack. For help, see "Installing the Battery
Pack" in Chapter 2.
2. Press to turn on the reader.
3. Type the password if the reader prompts you to do so. The Boot Loader
menu appears.
4. From the Boot Loader menu, select Reboot.
The reader begins rebooting, displays the BACKUP BATTERY screen, and
asks if you want to exit Storage mode.
BACKUP BATTERY
Backup Battery
Tests Good
Storage Mode is On
Please Press
Enter to Continue
Esc to Go Off
5. Press to exit Storage mode, continue booting the reader, and return to
the DOS prompt.
Note: If you press
battery pack, as described in Chapter 2.
BC
NF
Booting and Resetting the Reader
2020U.039
the reader remains in Storage mode. Immediately remove the
9
9-13