Intermec Janus 2020 User Manual page 109

4. Copy all the files you want on drive C to the working directory except for
the startup files, which must remain in C_FILES\COMMON.
If you want to copy files from drive C, you may need to use Interlnk. For
example, if you have PC card drivers installed on drive C, you should copy
them from the reader to the working directory on the host. You can also
copy files from the companion disks.
5. The command you type in Step 7 will copy the startup files from
C_FILES\COMMON to drive C, overwriting the startup files on your
reader.
If you need to customize the default AUTOEXEC.BAT or CONFIG.SYS,
you should do so now in the C_FILES\COMMON directory.
6. Make sure your current directory is the one where you installed the Auto-
Loader batch files, or make sure that directory is listed in the path
statement of your host computer's AUTOEXEC.BAT file.
7. Type this command:
loadnew [ path\ ] filename [ path\filename path\filename ...]
where:
path is the drive and directory of the file or files to include in
the image file and load to the reader. If you do not
include a path, the current directory is used.
is the name of the file or files to include in the image file
filename
and load to the reader.
You can include multiple path\filename and path\*.* parameters in the
command. The path\*.* parameter loads all the files in a directory. For
example:
loadnew c:\janus\data.txt c:\atadrv\*.*
8. Auto-Loader runs Intersvr on the host computer. When you see the
Interlnk Server Status screen on the host computer, press
warm boot the reader and load Interlnk into memory. Auto-Loader begins
updating drive C.
9. When the update is complete, the reader reboots automatically. Exit
Intersvr on the host computer by pressing Alt-F4. This message appears:
Drive C: Installation process completed.
10. Interlnk is still loaded in the reader's memory. If you need the conventional
memory to run other applications, press
reader. Because Intersvr is no longer running on the host computer, a warm
boot does not cause Interlnk to load itself into the reader's memory.
BC
NF
Learning About the Software
3
c:\data\*.*
to
to warm boot the
3-19