JANUS 2020 Hand-Held Computer User's Manual
IRL EOP (End of Program)
Purpose:
An EOP indicates the end of an IRL program block when you download a
program to the reader.
Note: You must select the communications port and protocol before you set the
parameters to define that protocol. For help, see "Communications Protocol,
Configure" earlier in this chapter.
Default:
SYN (synchronous idle)
Syntax:
XBdata
where data can be any ASCII character.
Scan:
To disable EOP, scan this bar code:
Disable EOP
*$+XB*
*$+XB*
Or:
To set EOP to an ASCII character:
1. Scan this bar code:
2. Scan a bar code for data from the "Full ASCII Bar Code Chart" in
3. Scan this bar code:
12-62
Enter Accumulate Mode / Set EOP
*+/$+XB*
*+/$+XB*
Appendix C.
Exit Accumulate Mode
*-/*
*-/*
BC
N F