Intermec Janus 2020 User Manual page 10

JANUS 2020 Hand-Held Computer User's Manual
Planning the Network Connection 6-9
Configuring the Reader for Communications 6-13
Running Interlnk to Transfer Files 6-25
Running Communications Manager 6-38
x
Choosing a Communications Application 6-10
Choosing a Communications Protocol 6-10
Choosing a Protocol Handler 6-12
Selecting the COM Port 6-13
Configuring the Communications Protocols 6-14
Multi-Drop Protocol Parameters 6-14
PC Standard Protocol Parameters 6-15
Point-to-Point Protocol Parameters 6-15
Polling Mode D Protocol Parameters 6-15
User-Defined Protocol Parameters 6-15
Activating One Communications Protocol 6-15
Loading and Unloading a Protocol Handler 6-16
Loading and Unloading a Protocol Handler at the DOS Prompt 6-16
Loading a Protocol Handler When You Boot the Reader 6-17
Loading and Unloading a Protocol Handler With a Batch File 6-17
Loading and Unloading a Protocol Handler With an Application 6-19
Specifying a Value for the FIFO Control Register 6-20
Connecting the Reader to Another Device 6-23
Differentiating Between Client and Server 6-25
Example of Using Interlnk 6-27
Interlnk System Requirements 6-28
Installing Interlnk on the Host Computer 6-29
Making the Host Computer the Client 6-30
Making the Reader the Client 6-32
Interpreting the Server's Status Screen 6-34
Redirecting Drives From the DOS Prompt 6-36
Exiting Interlnk 6-37
Restarting Interlnk 6-37
Using Communications Manager Menus 6-38
Selecting Menus and Commands 6-40
Filling In Fields and Marking Check Boxes 6-40
Exiting Screens and Saving Changes 6-41
Using a Series of Screens to Configure a Parameter 6-41
Exiting Communications Manager 6-41
Typing Commands at the DOS Prompt 6-42
BC BC
NF NF