Intermec Janus 2020 User Manual page 285

To break out of an application
1. Press to turn off the reader. If you must force the reader to turn off, see
the previous section.
2. Press - - .
3. Press to set the application break bit in the reader.
4. Press to turn on the reader.
If the application checks the application break bit, it should take appropriate
action when it detects that the bit has been set.
If the application does not check the application break bit, it will resume
running. You may have to cold boot the reader to break out of this application.
For help, see "Cold Booting the Reader" earlier in this chapter.
BC
NF
Booting and Resetting the Reader
9
9-7