Baud Rate - Intermec Janus 2020 User Manual

JANUS 2020 Hand-Held Computer User's Manual
Automatic Shutoff (continued)
3. Scan this bar code:
4. Scan this bar code:

Baud Rate

Sets the baud rate for the selected communications port on the reader. The
Purpose:
baud rate must match the baud rate of the device (for example, the host
computer) that the reader is communicating with.
For Polling Mode D protocol, you must set the baud rate to 1200 or higher. For
Multi-Drop protocol, you must set the baud rate to 2400 or higher.
Note: You must select the communications port and protocol before you set the
parameters to define that protocol. For help, see "Communications Protocol,
Configure" later in this chapter.
Default: 9600 baud
12-10
*2*
*2*
*4*
*4*
*6*
*6*
*8*
*8*
Timeout in Minutes
*M*
*M*
Exit Accumulate Mode
*-/*
*-/*
BC
N F
*3*
*3*
*5*
*5*
*7*
*7*
*9*
*9*