Intermec Janus 2020 User Manual page 156

JANUS 2020 Hand-Held Computer User's Manual
Use CARDINFO to manage the reader's power when an I/O card is in the PC
card drive. For example, a modem card draws power even when it is not in
use, so you can conserve the NiCad battery pack by turning off the power to
the PC card drive when you are not using the modem card.
To turn off the power to the PC card drive
• When you are not using the modem card, type this command:
To turn on the power to the PC card drive
• When you are ready to use the modem card, type this command:
4-26
cardinfo /off:1
Or scan this bar code:
*CARDINFO /OOFF/Z*
*CARDINFO /OFF:1*
cardinfo /on:1
Or scan this bar code:
*CARDINFO/OON/Z*
*CARDINFO /ON:1*
BC
N F