Intermec Janus 2020 User Manual page 289

4. Type the new password and press
Your password can contain up to seven characters.
5. Type the new password again for verification and press
If you type the password incorrectly, you receive an error message and you
need to repeat Steps 4 and 5.
6. Select Resume from the Boot Loader menu.
The reader resumes operating. You will be prompted for this password
when you display the Boot Loader menu or exit Storage mode.
To disable the password
1. Display the Boot Loader menu. For help, see the previous set of steps.
2. At the Boot Loader menu, press
3. Press . The PASSWORD screen appears.
4. Press twice without typing any other characters. This action disables
the password by creating a null password.
5. Select Resume from the Boot Loader menu.
BC
NF
Booting and Resetting the Reader
.
until you highlight Password.
9
.
9-11