Intermec Janus 2020 User Manual page 25

Format Conventions for Input From a Keyboard or Keypad
This table describes the formatting conventions for input from PC or host
computer keyboards and reader keypads:
Convention Description
Special text Shows the command as you should enter it into the reader. See
"Format Conventions for Commands" later in this chapter.
Italic text Indicates that you must replace the parameter with a value. See
"Format Conventions for Commands" later in this chapter.
Indicates the keys you must press on a PC or host computer
Bold text
keyboard. For example, "press Enter" means you press the key
labeled "Enter" on the PC or host computer keyboard.
Shows the key you must press on the reader. For example, "press
" directs you to press the key labeled "Enter" on the reader
keypad.
Shows a series of reader keys you must press and release in the
order shown. For example, "Press
reader."
- Shows a series of reader keys you must press simultaneously.
Also, you must press and hold the keys in the order shown. For
example, "Press
BC
NF
Before You Begin
- to enter Control mode."
to boot the
xxv