Intermec Janus 2020 User Manual page 320

JANUS 2020 Hand-Held Computer User's Manual
Using MkImage and PutImage (continued)
Problem
Error, not enough
free conventional
memory to create
disk image
Error, not enough
free disk memory to
create output file
Error, could not
open image file
Error, image file
not found
2020U.049
Error, invalid image
file, recreate using
the MkImage command.
Error, not enough
free conventional
memory to run this
program.
10-24
Solution
Free some conventional memory and then try to run MkImage
again. For help, see "Making More Memory Available on the
Reader" in Chapter 3.
2020U.043
There is not enough memory on your disk to create the
MkImage output file. Remove one or more files and free some
disk space.
2020U.045
Verify that the image file exists and you have the correct path
and filename in the PutImage command and then try again.
2020U.047
Verify that the image file exists and you have the correct path
and filename in the PutImage command and then try again.
The image was created by a method other than MkImage, or
you entered the wrong filename in the PutImage command.
Create the image file with MkImage, and then try running
PutImage again.
2020U.051
Free some conventional memory and try to run PutImage again.
For help, see "Making More Memory Available on the Reader"
in Chapter 3.
2020U.053
BC
N F