Plessey - Intermec Janus 2020 User Manual

JANUS 2020 Hand-Held Computer User's Manual

Plessey

Purpose: Enables or disables decoding of Plessey symbology. Plessey code is
pulse-width modulated. It includes a start character, data characters, an
eight-bit cyclic check digit, a termination bar, and usually a reverse start
character. The code is continuous and not self-checking. You need to configure
two parameters for Plessey code: Start Code and Check Digit.
Default: Disabled
Syntax: CIdata
Acceptable values for data are:
00
10
30
31
Scan: To disable Plessey:
Disable Plessey
*$+CI00*
*$+CI00*
To set Plessey, complete these steps:
Or:
1. Scan this bar code:
2. Scan one of these bar codes to transmit or retain the check digit:
12-76
Disabled
Plessey with reverse start code
Transmit check digit
Discard check digit
Plessey With Reverse Start Code
*$+CI10*
*$+CI10*
Transmit Check Digit
*$+CI30*
*$+CI30*
BC
N F
Discard Check Digit
*$+CI31*
*$+CI31*