Intermec Janus 2020 User Manual page 54

JANUS 2020 Hand-Held Computer User's Manual
Using the Cursor Keys
Cursor Key To Use the Key
Home Press
End Press
Page up Press
Page down Press
Insert Press
Delete Press
Arrow up Press
Arrow down Press
Arrow right Press
Arrow left Press
2-12
Description
Moves the cursor to the top left corner of the display. If you are at
the DOS prompt, moves the cursor to the beginning of the line.
Moves the cursor to the end of the last line displayed on the screen.
Moves the cursor up one screen. If you are at the DOS prompt and
the DOSKEY command is enabled, scrolls up one page of DOS
commands.
Moves the cursor down one screen. If you are at the DOS prompt
and the DOSKEY command is enabled, scrolls down one page of
DOS commands.
Each character you type is inserted after the cursor until you exit
Insert mode by pressing
Normally, you type text in Overwrite mode. Characters are typed
over the existing characters on the screen.
Deletes or erases the character displayed above the cursor.
Moves the cursor up one row or line. If you are at the DOS prompt
and the DOSKEY command is enabled, scrolls up to the previous
DOS command.
Moves the cursor down one row or line. If you are at the DOS
prompt and the DOSKEY command is enabled, scrolls down to the
next DOS command.
Moves the cursor one character to the right.
Moves the cursor one character to the left.
again.