Intermec Janus 2020 User Manual page 373

Syntax: CBdata
Acceptable values for data must be three digits, corresponding to:
First digit:
Second digit:
Third digit:
Note: Selecting HIBC Code 39 automatically sets the configuration to non-full ASCII
with the check digit transmitted.
Scan: To disable Code 39:
Disable Code 39
*$+CB0*
*$+CB0*
Or: To enable Code 39:
1. Scan this bar code:
2. Scan one of these bar codes to set the first digit:
NF
0 Disabled
1 Enabled with no check digit
2 Enabled with check digit
3 HIBC (Health Industry Bar Code)
4 With AIAG check digit
0 Discard check digit
1 Transmit check digit
0 Code 39 non-full ASCII
1 Code 39 full ASCII
2 Code 39 mixed-full ASCII
Enter Accumulate Mode / Enable Code 39
*+/$+CB*
*+/$+CB*
Without a Check Digit
*1*
*1*
HIBC Code 39
*3*
*3*
BC
Configuration Command Reference
With a Check Digit
*2*
*2*
With AIAG Check Digit
*4*
*4*
12
12-23